Skip to content

Metal Siding in Harahan, LA

Licensed · Insured · 20+ Years Gulf Coast Experience · No Subcontracting

Lic. #890459 & #3667
20+ Years Gulf Coast
4.9★ Google Reviews
Zero Subcontracting

Turnkey Siding brings durable metal siding to Harahan, from the river-levee neighborhoods to Colonial Club Estates near the Huey P. Long Bridge. Our licensed in-house crew handles every step, and we never pass work to subcontractors. Wedged between the levee and Elmwood in Jefferson Parish, these homes need siding that laughs off humidity and heavy rain, and metal delivers. Call 504-882-9704 for a free estimate.

Metal siding in aluminum or steel is tough, low-maintenance, and high-wind rated, with corrosion-resistant coatings, at roughly $5 to $12 per square foot installed.

Metal Siding for Harahan’s Riverside Homes

Harahan runs along the river in Jefferson Parish, a compact community pinned between the levee and the Elmwood district near the Huey P. Long Bridge. Its neighborhoods sit close to the water, where humidity stays high and heavy summer rain is routine. That environment is hard on wood, but it suits metal siding well. Coated steel and aluminum shed water on contact, resist the corrosion that high humidity brings, and never rot, so walls stay sound season after season without much attention.

Homes in the river-levee neighborhoods and Colonial Club Estates tend toward mid-century ranch and brick-and-frame builds with clean, straightforward lines that metal panels flatter. The finish can lean modern or hold a traditional lap look, whichever fits the street. Because the same panels perform on the commercial buildings over toward Elmwood, metal is a versatile pick for the whole area. It resists fire and holds up to tropical-storm wind when fastened right. The one honest drawback is denting under a heavy impact, so we choose gauge based on how exposed each wall is.

Harahan Metal Siding Questions

Does Harahan need a siding permit?

Yes. As part of Jefferson Parish, Harahan generally requires a permit for re-siding, which our crew pulls along with the inspection.

Is metal siding good this close to the river?

It is. The humidity and heavy rain near the levee wear on wood, but metal sheds water and resists corrosion and rot, so it holds up well.

How much will metal siding cost?

Expect roughly $5 to $12 per square foot installed, depending on your home’s size, the panel gauge, and prep work.

Want a free metal siding estimate for your Harahan home? Call Turnkey Siding at 504-882-9704 or request one online.

Siding installation Metal Siding in Harahan, LA
All 8 Materials In-House

Other Siding Services We Install

Every material installed by the same licensed crew. Nothing limited by your zip code.

Where We Work

Serving 19 Communities
Across Southeast Louisiana

One licensed crew. No subcontracting. Free on-site estimates anywhere in our service area.

Browse All Service Areas →
What Our Customers Say

Trusted Across Southeast Louisiana

★★★★★ 4.9 average · 200+ Google Reviews
★★★★★

“Metal cladding for our commercial building. Licensed, on time, and the only contractor who fully understood the scope from day one.”

S
Sandra M.
Metairie · Commercial Project
★★★★★

“Replaced our vinyl siding after Hurricane Ida damage. Turnkey handled permits, insurance coordination, everything. The house looks brand new.”

J
James T.
Kenner · Residential
★★★★★

“Got quotes from 4 contractors. Turnkey was the only one who offered fiber cement AND explained exactly why it was right for our home.”

M
Michelle R.
Mandeville · Residential
★★★★★

“Our 1960s ranch had rotting wood siding on three sides. Turnkey stripped it, added moisture barrier, and put up fiber cement. No more painting every three years.”

R
Robert C.
Gretna · Older Home Renovation
★★★★★

“After Zeta took out a whole section of our soffit and siding, we called three contractors. Turnkey was the only one who showed up the same week to assess it.”

D
Denise B.
Slidell · Storm Repair
★★★★★

“Built our custom home and needed siding that would handle Louisiana summers without constant upkeep. Turnkey spec’d the right product and finished a week early.”

K
Kevin L.
Covington · New Construction
Ready to Start?

Get a Free Estimate on
Your Project

No pressure. No obligation. Just an honest quote from a licensed contractor who knows Gulf Coast construction.