Skip to content

Stucco Siding in Hammond, LA

Licensed · Insured · 20+ Years Gulf Coast Experience · No Subcontracting

Lic. #890459 & #3667
20+ Years Gulf Coast
4.9★ Google Reviews
Zero Subcontracting

Turnkey Siding installs stucco siding across Hammond, from downtown Hammond and the Southeastern Louisiana University area. Our own licensed crew handles the whole job and installs Gulf Coast-spec materials built for this climate, done to code. No subcontractors are ever sent to your property. Get a free estimate at 504-882-9704.

Stucco Siding is a cement-based plaster finish that gives a seamless, traditional look popular on many Louisiana homes, running about $7 to $12 per square foot installed in the New Orleans metro. A correct install lasts 30 to 50 years, as long as the right product is used and it is detailed properly for our climate. We provide written, itemized estimates for every Hammond project, not a ballpark range at signing, and we install Gulf Coast-spec stucco siding, not the cheapest builder-grade product, because the Northshore’s humidity, UV, and storm exposure punish anything cut-rate on the exterior.

Why Stucco Siding Works in Hammond

Hammond sits inland in Tangipahoa Parish, still firmly in hurricane and heavy-humidity territory. We use Gulf Coast-spec, high-wind-rated products detailed to shed the area’s intense summer rain.

How we install stucco siding in Hammond

Stucco needs a proper drainage plane and control joints in our climate so humidity and shifting soils do not crack it.

We install it as a true multi-coat system over the right moisture barrier, not a thin shortcut that traps water.

Done correctly, it delivers a clean seamless exterior that suits both classic and modern Louisiana homes.

That detailing is the difference between a Hammond exterior that lasts 30 to 50 years and one that fails early. It is also why we keep the work in-house instead of handing it to a subcontractor who may never set foot in Tangipahoa Parish again.

4 Steps. No Surprises.

  1. On-Site Estimate:we measure your Hammond home in person and write an itemized quote.
  2. Written, Itemized Quote:exact materials, finish, and labor in writing before any work starts.
  3. Licensed Install:work done to code by our in-house crew, no subs.
  4. Final Walkthrough:we walk the finished job with you before we call it done.

Why Hammond Homeowners Choose Turnkey

We are a licensed Louisiana contractor, not a lead broker. The crew that quotes your job is the crew that installs it. We carry residential license #890459 and commercial license #3667, we are insured, and we have spent 20-plus years on Gulf Coast exteriors.

Other Siding We Install in Hammond

Siding installation Stucco Siding in Hammond, LA
All 8 Materials In-House

Other Siding Services We Install

Every material installed by the same licensed crew. Nothing limited by your zip code.

Where We Work

Serving 19 Communities
Across Southeast Louisiana

One licensed crew. No subcontracting. Free on-site estimates anywhere in our service area.

Browse All Service Areas →
Common Questions

Frequently Asked Questions

What does stucco siding cost in Hammond?

Generally $7 to $12 per square foot installed. The cost reflects that stucco is a multi-coat system, not a single-layer finish.

Does stucco crack in Louisiana’s climate?

It can if installed without proper control joints and a drainage plane. Installed as a true multi-coat system over the right barrier, it holds up to humidity and minor soil movement.

Is stucco low maintenance?

Yes, beyond occasional cleaning and sealing cracks early. The key is a correct install so water never gets trapped behind it.

Do you install stucco siding throughout Hammond?

Yes. Our in-house licensed crew installs across Hammond and the surrounding Tangipahoa Parish area, from downtown Hammond and the Southeastern Louisiana University area. One crew, no subcontracting, every job done to code.

Get My Free Estimate · 504-882-9704


What Our Customers Say

Trusted Across Southeast Louisiana

★★★★★ 4.9 average · 200+ Google Reviews
★★★★★

“Metal cladding for our commercial building. Licensed, on time, and the only contractor who fully understood the scope from day one.”

S
Sandra M.
Metairie · Commercial Project
★★★★★

“Replaced our vinyl siding after Hurricane Ida damage. Turnkey handled permits, insurance coordination, everything. The house looks brand new.”

J
James T.
Kenner · Residential
★★★★★

“Got quotes from 4 contractors. Turnkey was the only one who offered fiber cement AND explained exactly why it was right for our home.”

M
Michelle R.
Mandeville · Residential
★★★★★

“Our 1960s ranch had rotting wood siding on three sides. Turnkey stripped it, added moisture barrier, and put up fiber cement. No more painting every three years.”

R
Robert C.
Gretna · Older Home Renovation
★★★★★

“After Zeta took out a whole section of our soffit and siding, we called three contractors. Turnkey was the only one who showed up the same week to assess it.”

D
Denise B.
Slidell · Storm Repair
★★★★★

“Built our custom home and needed siding that would handle Louisiana summers without constant upkeep. Turnkey spec’d the right product and finished a week early.”

K
Kevin L.
Covington · New Construction
Ready to Start?

Get a Free Estimate on
Your Project

No pressure. No obligation. Just an honest quote from a licensed contractor who knows Gulf Coast construction.