Skip to content

Metal Siding in Westwego, LA

Licensed · Insured · 20+ Years Gulf Coast Experience · No Subcontracting

Lic. #890459 & #3667
20+ Years Gulf Coast
4.9★ Google Reviews
Zero Subcontracting

Turnkey Siding installs metal siding in Westwego, from the historic Salaville district to homes near the Bayou Segnette area. Our licensed in-house crew handles the full install, and subcontractors never touch your property. On the West Bank near the bayou in Jefferson Parish, aluminum and steel panels resist the constant humidity and heavy rain with almost no upkeep. Call 504-882-9704 for a free estimate.

Metal siding in aluminum or steel is tough, low-maintenance, and high-wind rated, with corrosion-resistant coatings, at roughly $5 to $12 per square foot installed.

Metal Siding for Historic Westwego

Westwego sits on the West Bank in Jefferson Parish, close to Bayou Segnette and the wetlands beyond, with roots that run back to the old Salaville settlement and its historic Sala Avenue market. The land is low and the air humid, conditions that wear hard on wood siding over the years. Metal siding stands up to it. Coated steel and aluminum won’t rot in the damp bayou air, give termites nothing to feed on, and shed the heavy rain and afternoon thunderstorms that are routine this close to the water.

The Salaville district and the neighborhoods near the Bayou Segnette area hold a lot of older cottages and practical family homes where character and low upkeep both count. Metal siding balances the two, holding a traditional profile that respects the historic streets or laying flat and modern where a home calls for it. It resists fire, stands up to tropical-storm wind when fastened right, and works just as well on the small commercial buildings around the old market. Once it’s up, upkeep is minimal. The one tradeoff is denting under heavy impact, which we plan around.

Westwego Metal Siding Questions

Does Westwego require a siding permit?

Yes. Westwego falls under Jefferson Parish, which generally requires a permit for re-siding. Our crew handles it and the inspection.

Is metal siding good near Bayou Segnette?

It is. The bayou keeps the air humid, and metal resists the rot and pests that damp conditions encourage far better than wood.

What does metal siding cost in Westwego?

Roughly $5 to $12 per square foot installed, depending on your home’s size, panel gauge, and trim work.

Want a free metal siding estimate for your Westwego home? Call Turnkey Siding at 504-882-9704 or request one online.

Siding installation Metal Siding in Westwego, LA
All 8 Materials In-House

Other Siding Services We Install

Every material installed by the same licensed crew. Nothing limited by your zip code.

Where We Work

Serving 19 Communities
Across Southeast Louisiana

One licensed crew. No subcontracting. Free on-site estimates anywhere in our service area.

Browse All Service Areas →
What Our Customers Say

Trusted Across Southeast Louisiana

★★★★★ 4.9 average · 200+ Google Reviews
★★★★★

“Metal cladding for our commercial building. Licensed, on time, and the only contractor who fully understood the scope from day one.”

S
Sandra M.
Metairie · Commercial Project
★★★★★

“Replaced our vinyl siding after Hurricane Ida damage. Turnkey handled permits, insurance coordination, everything. The house looks brand new.”

J
James T.
Kenner · Residential
★★★★★

“Got quotes from 4 contractors. Turnkey was the only one who offered fiber cement AND explained exactly why it was right for our home.”

M
Michelle R.
Mandeville · Residential
★★★★★

“Our 1960s ranch had rotting wood siding on three sides. Turnkey stripped it, added moisture barrier, and put up fiber cement. No more painting every three years.”

R
Robert C.
Gretna · Older Home Renovation
★★★★★

“After Zeta took out a whole section of our soffit and siding, we called three contractors. Turnkey was the only one who showed up the same week to assess it.”

D
Denise B.
Slidell · Storm Repair
★★★★★

“Built our custom home and needed siding that would handle Louisiana summers without constant upkeep. Turnkey spec’d the right product and finished a week early.”

K
Kevin L.
Covington · New Construction
Ready to Start?

Get a Free Estimate on
Your Project

No pressure. No obligation. Just an honest quote from a licensed contractor who knows Gulf Coast construction.