Skip to content

Metal Siding in Marrero, LA

Licensed · Insured · 20+ Years Gulf Coast Experience · No Subcontracting

Lic. #890459 & #3667
20+ Years Gulf Coast
4.9★ Google Reviews
Zero Subcontracting

Turnkey Siding installs metal siding throughout Marrero, from Ames and Estelle to the Barataria Boulevard corridor. Our licensed in-house crew handles the entire install, and no subcontractors ever work your home. On the low, humid West Bank near Bayou Segnette in Jefferson Parish, steel and aluminum siding shrugs off moisture and heavy rain year round. Call 504-882-9704 for a free estimate.

Metal siding in aluminum or steel is tough, low-maintenance, and high-wind rated, with corrosion-resistant coatings, at roughly $5 to $12 per square foot installed.

Metal Siding for Marrero’s West Bank Homes

Marrero is an unincorporated West Bank community in Jefferson Parish, low-lying and humid, sitting near Bayou Segnette and the wetlands beyond it. The ground stays damp and the air heavy, conditions that wear on wood siding fast through rot and pest damage. Metal siding is a natural fit. Coated steel and aluminum won’t rot no matter how humid it gets, give termites nothing to feed on, and shed the heavy rain and afternoon thunderstorms that roll across this part of the parish.

The neighborhoods of Ames and Estelle, along with the homes strung out near the Barataria Boulevard corridor, hold a lot of practical ranch and frame houses where low maintenance matters to busy families. Metal delivers that. Once the panels are up, upkeep is little more than an occasional rinse, and the finish can read modern or traditional depending on the home. It resists fire and stands up to tropical-storm wind when properly fastened, and the same panels work on the small commercial buildings along the boulevard. The one caveat is denting under heavy impact, which we plan around.

Marrero Metal Siding Questions

Does Marrero require a siding permit?

Yes. Marrero falls under Jefferson Parish, which generally requires a permit for re-siding. Our crew handles it and the inspection.

Is metal siding good for this humid, low area?

It is. Near Bayou Segnette the ground stays damp, and metal resists the rot and pests that thrive in that moisture far better than wood.

What does metal siding cost in Marrero?

Roughly $5 to $12 per square foot installed, depending on your home’s size, panel gauge, and trim work.

Want a free metal siding estimate for your Marrero home? Call Turnkey Siding at 504-882-9704 or request one online.

Siding installation Metal Siding in Marrero, LA
All 8 Materials In-House

Other Siding Services We Install

Every material installed by the same licensed crew. Nothing limited by your zip code.

Where We Work

Serving 19 Communities
Across Southeast Louisiana

One licensed crew. No subcontracting. Free on-site estimates anywhere in our service area.

Browse All Service Areas →
What Our Customers Say

Trusted Across Southeast Louisiana

★★★★★ 4.9 average · 200+ Google Reviews
★★★★★

“Metal cladding for our commercial building. Licensed, on time, and the only contractor who fully understood the scope from day one.”

S
Sandra M.
Metairie · Commercial Project
★★★★★

“Replaced our vinyl siding after Hurricane Ida damage. Turnkey handled permits, insurance coordination, everything. The house looks brand new.”

J
James T.
Kenner · Residential
★★★★★

“Got quotes from 4 contractors. Turnkey was the only one who offered fiber cement AND explained exactly why it was right for our home.”

M
Michelle R.
Mandeville · Residential
★★★★★

“Our 1960s ranch had rotting wood siding on three sides. Turnkey stripped it, added moisture barrier, and put up fiber cement. No more painting every three years.”

R
Robert C.
Gretna · Older Home Renovation
★★★★★

“After Zeta took out a whole section of our soffit and siding, we called three contractors. Turnkey was the only one who showed up the same week to assess it.”

D
Denise B.
Slidell · Storm Repair
★★★★★

“Built our custom home and needed siding that would handle Louisiana summers without constant upkeep. Turnkey spec’d the right product and finished a week early.”

K
Kevin L.
Covington · New Construction
Ready to Start?

Get a Free Estimate on
Your Project

No pressure. No obligation. Just an honest quote from a licensed contractor who knows Gulf Coast construction.